How to Install an Inline Sediment Filter For Well Water: Complete Guide

Water is an essential part of our day-to-day lives. It is essential not just when it comes to our health but also when it comes to making sure the entire household is running smoothly. Indeed, water is vital for existence.

But of course, what we need is not just any kind of water. What we need for ourselves, our families, and our households is water that is clean and safe. We need water that we can safely drink.  Further, we need water that is clean and safe enough to use for bathing, laundry, dishwashing, cooking, and more.

In most communities, water comes from wells. Wells are a common water source from which tap water comes. Well, water, while easily accessible, is not particularly clean nor safe and on its own may not meet the requirements and standards set by the FDA for safety and cleanliness.

Water filters help address that problem. A water filtration system is a good way to be able to have clean and safe water without necessarily breaking the bank. It is sustainable; it is practical and, when looking long-term, is less costly than buying purified or distilled water from the stores.

Water Sediment Filter

Water filters are very useful tools to cleanse your home water and make it safe and clean. If you want to trap dirt, sand, silt, and other particulate matter from the water in your household, then having a sediment filter is necessary.

Water filters take away the unwanted impurities from the water, such as taste and odor, sediment, bacteria, and hardness. And removing these results in water that is of better quality.

How Do These Work?

How Do These Work?

As we all know, water is among the most important substances on the planet. 71% of the Earth’s surface is covered by water. The human body contains as much as 75% of water. Truly, water in many, many things — especially wellness and domestic life. And a water filter system ensures you have fresh-tasting and clean water right from your tap.

As we mentioned earlier, most communities get their water from wells. Because this is the water source, the water that one gets into their home is usually not potent and safe all at once.

Hence, depending on the location of your home – there are different sediments, minerals, and even chemicals that can be found in the water you get from the well in your area.

Water filter systems work by segregating the impurities and sediments that can make your water unsafe and unclean. By separating these unwanted elements, you are left with water that is good to go for your day-to-day usage and intake.

Installing An Inline Sediment Well-Water Filter

Inline sediment filters for well water is one of the smartest choices to filter unwanted sediment from your well water. These inline sediment filters are highly effective, and they are also economically sustainable.

When referring to inline sediment filters, what you are looking at is a spin-down filter on your filtration system for well water. It is a sediment filter that is installed in-line or parallel to where the water service line will enter.

Knowing where to install your filter exactly within your well water filtration system is as vital as buying the filter, to begin with. It is important to install it correctly because if your filter is not placed in the right location, this can hinder its ability to perform in the most effective manner.

How To Install: Pointers & Guide

How To Install: Pointers & Guide

Read on for optimal installation of your inline sediment well-water filter.

  • Make sure that you place the filter in this location: On the pressure side of your pump, right after the pressure tank. This will help ensure that you are protecting your pump. This placement will also allow the filter to be cleaned up without losing pump prime.
  • When connecting a water filter to the well water filtration system, you need to place it right alongside the main water supply line where the water supply line enters the house.
  • You also have to remember to put the water filter alongside the line just before it hits the storage tank or water softener.


  • The sooner that you allow the sediment filtration process to begin, the better it will be for the entire system. When the sediment travels a good distance throughout your pipes, this will lead to a lot of unnecessary wear and tear, which will then just cause problems leading to costs for repairs that could have been avoidable.
  • It is also important that you place the filter in an area where it will not get damaged. This area should be clear from freezing, excessive heat, chemical exposure, or possible impact.
  • Accessibility is an important factor to consider because you have to keep in mind the cleaning and maintenance. You will need to be able to flush out all the sediment that it traps. Therefore, the easier the access will be, the better.

Inline Sediment Filter Installation: The Facts

Let’s touch on some of the important things to consider and keep in mind if you are going to be installing an inline sediment filter for well water.

Where Should I Install my Inline Sediment Filter for Well Water?

In order for your sediment filter to most effectively trap dirt, sand, silt, and other particulates from your home water before it enters your household, you should install a sediment pre-filter right in front of an inline softener, right near the point in your house where the water service line will enter.

Where Should I Install my Water Filter?

Make sure that your current plumbing lines on your property are located precisely in line with your water filtration system. To ensure that this is the case, you may have to find the horizontal pipe that runs after the shut-off valve found at the back of your property and cut off some branches.

Can I Put a Water Filter for the Well?

Yes, as mentioned above, well water filtration systems can be installed to make sure that none of the water from the well that enters your household is unclean or unsafe. An additional, separate water filter under the sink is likewise a suitable method to filter water that comes from a specific tap source in your home, such as in the kitchen sink or in the bathroom.

Is Having a Sediment Filter Really Necessary?

In order for your water treatment system to be most effective, you should definitely invest in sediment filters. As well water may have some debris, dirt, or fine particles, a sediment filter is required for it to be filtered in the most optimal way possible.

Is Getting a Water Filter a Good Idea?

Yes, water filters are an excellent choice you can make for yourself and your household. In addition to taking out debris and contaminants from your well water, filtering the water is also a good way to make it taste better.

To add to that, water filters also contribute to a cleaner, more sustainable environment because it uses far less single-use plastic than if you buy bottled filtered water. This will help you to be able to embrace a greener life. Water filters can likewise improve aspects of tap water from the well even further.

What Happens If I Don’t Use a Sediment Filter for Well Water?

Basically, water filtration systems, and specifically inline sediment filters, allow you to have access to water that is much cleaner and safer. If you do not use one for your water source at home, you may be exposed to unwanted sediments, chlorine, and other particulates that are harmful. The water may also end up with a less than favorable odor as well as taste.

Can I Install a Sediment Filter After my Water Softener?

There are benefits to filtering before or after the water softener, and this will depend on the quality of your well water. When you add a filter after your water softener, the softened resins will then remain tapped in the softener. However, if your well water has a high level of turbidity or mud in it, then a filter should likewise be installed before it enters the softener so that the mud can be filtered out.

Bottom Line

It is highly recommended that the sediment filter be placed in the pressure tank before it is used. This should be placed right at the top in line to prevent sediment from otherwise infecting all of the other types of water filters you will be using.

Water filter systems are able to remove unwanted odors and tastes from your main water source, such as a well. Inline sediment filters for well water are a good way to take away sediments from the well water before it gets into your home. This enables you to have clean and fresh-tasting water coming straight from the tap.

Because well water naturally has some amount of sediments, particulates, sand, and other matter. An inline sediment filter is your solution to removing these before your water source enters the house. Here’s to having clean, safe, fresh-tasting water in your household that is sustainable, accessible, and low-cost!

Check Out These Article
How to Install an Under Sink Water Filter
How Much Does it Cost to Install a Water Softener System
How to Install a Water Softener Yourself?
How To Install Water Filter Faucet in 5 Easy Steps
How To Install Keurig Water Filter In Five Simple Steps