Clean water is essential in your home to prevent contaminants from getting into your body and causing illnesses. Most water sources have many pollutants that can cause severe damage without proper screening. Water filters act as screeners, removing all the dirt and impurities from the water.
Water filters come in different forms with varying connection points which can affect how you use the filter. The whole house and point of use are the primary difference when considering usage. One of the many different filter types is the Brita water filter, a novel filtration system developed by the Brita brand and attached to the faucet.
Brita filters are considered easy to install and can remove many impurities from your water. As a point-of-use filter, the workload done by the system is minimal, helping it last longer.
Here, we’ll show you how to install a Brita water filter without a plumber. We’ll also include helpful tips to secure the filter, prevent leakages, and prolong its lifespan. But before then, let’s see the different types of Brita faucet filters.
Table of Contents
Types of Brita Faucet Filters
Learning about the types of Brita faucet filters available will help you make the correct buying decision for your home. Here are the two kinds of Brita faucet filters:
Basic Brita faucet filters come with a single cartridge and outlet. It can remove impurities with reasonable accuracy but may struggle with removing a wide range of pollutants, especially if they’re in different classes. Basic Brita faucets are typically more affordable than the complete variant.
Complete Brita faucet filters come with two cartridges, are generally heavier due to this addition, and have three outlets. They are also more expensive but offer a more complex purification system that significantly removes pollutants. Here are the three water outlets the complete Brita features:
- Filtered water: If you want purified water after fixing this filtration system to your faucet, adjusting the device is all you need. You can get filtered water from the Brita filter by turning the device forward until it sits in front of the “Brita” logo.
- Unfiltered water: If you want to get unfiltered water even after attaching the Brita filter, turn the handle to the middle. Ideally, this position should have the handle pointing at a single droplet of water symbol. This way, you can allow the filter to rest when you don’t need filtered water.
- Unfiltered spray water: The complete system can also bring out unfiltered water in a spraying manner when you turn the handle backwards till it’s in front of three water droplets symbol
Step-by-Step Instructions For Installing Brita Water Filter to Faucet
Generally, Brita water filters are easy to install, with its package with all the materials you need. This way, you don’t have to purchase additional materials and increase your expenses. We’ll provide an easy-to-understand process for installing a Brita filter to your faucet.
Step One: Purchase The Correct Brita Filter
The correct Brita filter is the Brita faucet filter since you want it connected to your sink tap. The package should come with the Filtration system, adapters, and washers. With all these in place, you can start the installation process.
Step Two: Clean The Nozzle
Before installing any attachment, ensure the nozzle area is clean by removing any smug or dirt buildup. Start by removing the aerator, grabbing it with your thumb and forefinger, and unscrewing it. You may need to use a rag to remove this aerator.
Clean the aerator, removing any limescale around its edges and between its pores. Another area prone to rust and limescale is the faucet nozzle, and the best way to clean this is by filling a plastic bag with vinegar and tying it to the faucet. Ensure the faucet is dipped into the vinegar for about forty-five minutes before rinsing.
Step Three: Attach The Adapter And Washer
The Brita filter package has two adapters and washers that should fit your faucet nozzle. Typically, if your faucet has external threads, you won’t need an adapter to attach the Brita. However, if the lines are inside the nozzle, adapters are required.
If you don’t need an adapter, you can skip to the next step; similarly, if you need an adapter but can’t find the right fit, call the Brita customer service line, and you should get a suitable adapter free of charge.
Inspect the faucet and adapter sizes to determine the correct adapter and washer to install. The connector has a recessed end where you should place the washer. It should fit snugly inside if it’s the right size. Screw the connector to the faucet by placing the washer end up and aligning the threads. It may take a few tries to align the lines, but it should be easy to screw by hand.
Step Four: Attach The Brita Base
Attaching the Brita Base is as easy as screwing it to the faucet or adapter, but you must first position it correctly. Here are a few tips to remember while aligning the Brita base:
- Ensure the Brita indicator is facing you
- Place the filter cup to the left of the faucet
- Align the mounting collar directly under the faucet
With the base adequately aligned to the faucet or connector nozzle, hold the base with one hand and twist the mounting collar. You should rotate the collar till it moves up and fit snugly on the thread.
Step Five: Insert Cartridge
With the base system in place, the cartridge is the next part to be attached, which requires only a simple mechanism. You want to hold the Brita base with one hand for support while holding the cartridge over the filter cup.
After ensuring the cartridge pins align with the grooves in the filter cup before pressing it down into the cup. It should click into place without much effort. However, you may need to realign and press down again if it doesn’t click into place with minimal effort.
Immediately the cartridge clicks into place and cannot be removed with a gentle pull; the filter should reset, and the indicator should turn green.
Step Six: Flush The Cartridge
Most filtration units require flushing after installation and flushing before use to clean dirt from the system. Move the handle to the filtered water section and turn on the faucet so water can run through. Leave this water running for about five minutes to remove dust, activate, and excess carbon.
Benefits of Using Brita Faucet Filters
Considering Brita faucet filters are less popular than the under-sink water filter, there may be some reservations evaluating the effectiveness and benefits of using Brita. So here, we’ll see the benefits of using Brita faucet filters to purify water.
- Removes impurities: Brita faucet filters use a carbon block to remove pollutants such as chlorine, benzene, asbestos, and lead, while the nonwoven material reduces sediments in the water.
- Improves taste and odor: the activated carbon in the filter removes chemicals like chlorine and improves its taste and odor.
- Easy to install, use, and maintain: one of the most significant benefits of using Brita faucet filters is that they are easy to install without needing professionals, saving you installation costs. These filters are also easy to use, with their handle providing an easy way to turn the filtered water system on and off. Maintaining the faucet filter will also be straightforward, with a LED indicator showing when the filter needs maintenance or replacement. The green indicator typically indicates functional, while red shows it needs maintenance or replacement.
Here are popular questions about installing and using Brita faucet filters with their answers:
How Can I Read Brita Indicators?
• A flashing Green LED indicator means the Brita is in good condition and working.
• A flashing Amber indicator means the Brita will soon be due for replacement. Typically a warning signal to get ready for a replacement.
• A flashing Red LED indicator shows you to replace the Brita filter as it has surpassed the recommended runtime or amount of water filtered
Why Does my Brita Faucet Filter Not Fit?
If the Brita faucet filter does not fit, it may be due to the threads being in the wrong position. You’ll need an adapter to correct this; the manufacturers include two sets of adapters and washers in the package. If nothing fits, you should contact customer service for a connector.
Are You Supposed to Soak Your Brita Faucet Filter Before Installing it?
No, you do not need to soak the faucet filter before installing it. However, you’ll need to flush the filter by running cool water through the system for five minutes. Ensure the handle is turned towards filtering water when flushing the Brita.
Brita faucet filter is a simple-to-install, use, and maintain filtration system to attach to your sink nozzle and enjoy clean water. The package comes with all the materials you’ll require for installation, but you must first decide whether to buy the primary or complete type of Brita faucet filter.
While its ease of use is commendable, it does not remove all impurities and can be expensive. It is excellent for an easy-to-use system to clean your not-so-contaminated water. Remember that these filters are not recommended for pull-out or spray-type faucets, as their weight can damage the faucet nozzles.